21 products












Alaska Extreme Lite III Ms Pant, Forest Green (Rain-Stop)
The updated Alaska Extreme Lite III pant is a light weight and quiet year-round hunting pant with many technical details. Waterproof and breathable Rain-Stop 2-layer outer fabric and soft mesh lining. Extra durable YKK water repellent zippers. Velcro adjustments on calves and leg opening.
- Quiet and soft brushed tricot face material
- Waterproof and breathable Rain-Stop membrane
- Extra breathable mesh lining
- YKK water repellent zippers
- Adjustable waistband
- Velcro adjustments on calves and leg opening
Technical specs:
- Waterproofing 10 000 mm
- Breathability 8 000 g/m2/24h
- Fully-Taped seams
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics










Alaska Extreme Lite III Ms Pant, BlindTech Invisible (Rain-Stop)
The updated Alaska Extreme Lite III pant is a light weight and quiet year-round hunting pant with many technical details. Waterproof and breathable Rain-Stop 2-layer outer fabric and soft mesh lining. Extra durable YKK water repellent zippers. Velcro adjustments on calves and leg opening.
- Quiet and soft brushed tricot face material
- Waterproof and breathable Rain-Stop membrane
- Extra breathable mesh lining
- YKK water repellent zippers
- Adjustable waistband
- Velcro adjustments on calves and leg opening
Technical specs:
- Waterproofing 10 000 mm
- Breathability 8 000 g/m2/24h
- PFC-free DWR treatment
- Fully-Taped seams
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics
Perfect choice for hunting and fishing














Alaska Extreme Lite III Ms Jacket, Forest Green (Rain-Stop)
The updated Alaska Extreme Lite III jacket is a light weight and quiet year-round hunting jacket with many technical details. Waterproof and breathable Rain-Stop 2-layer outer fabric and soft mesh lining. Extra durable YKK water repellent zippers. Special radio pocket with antenna holder. Adjustable hood at front and back.
- Quiet and soft brushed tricot face material
- Waterproof and breathable Rain-Stop membrane
- Extra breathable mesh lining
- YKK water repellent zippers
- Radio pocket with antenna holder
- Hood adjustment at front and back
Technical specs:
- Waterproofing 10 000 mm
- Breathability 8 000 g/m2/24h
- Fully-Taped seams
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics
Very happy with this jacket. Very good quality of materials
A perfectly made, refined product in every detail with a highly performant rain-stop membrane. Suitable not only for hunting but also long walks and forest trails. Thanks for dolasu.pl for having imported it to Poland. Kiitos paljon ja eläköön Suomi ,)


















Alaska Extreme Lite III Ms Jacket + Pant (Rain-Stop), Forest Green
Delivery time 3-7 business days – Shipping cost 5,90€-9,90€ – Free returns
SUPER OFFER – PLACE YOUR ORDER BEFORE THEY RUN OUT!
The Extreme Lite III hunting jacket and pant with Rain-Stop membrane provides an excellent fit, light weight and water-resistance. The suit is equipped with silent brushed material and water-repellent zippers.
- Silent and light weight, for all kind of hunting activities
- Completely water-resistant (Rain-Stop membrane + taped seams)
- Popular Forest Green color
Jacket:
- Radiopockets with antenna loops
- 2 chest pockets and 2 hand pockets with water-repellent zippers
- Adjustable hood and hem
- Light mesh lining
- 2 pockets inside the jacket
Pants:
- 2 open hand pockets
- 2 bellow pockets with water-repellent zippers
- Adjustable leg opening with velcro closing
- Adjustable waist with beltloops
- Light mesh lining
Technical specs:
- Waterproofing 10 000 mm
- Breathability 8 000 g/m2/24h
- Fully-Taped seams
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics












Alaska Extreme Lite III Ms Jacket, BlindTech Invisible (Rain-Stop)
The updated Alaska Extreme Lite III jacket is a light weight and quiet year-round hunting jacket with many technical details. Waterproof and breathable Rain-Stop 2-layer outer fabric and soft mesh lining. Extra durable YKK water repellent zippers. Special radio pocket with antenna holder. Adjustable hood at front and back.
- Quiet and soft brushed tricot face material
- Waterproof and breathable Rain-Stop membrane
- Extra breathable mesh lining
- YKK water repellent zippers
- Radio pocket with antenna holder
- Hood adjustment at front and back
Technical specs:
- Waterproofing 10 000 mm
- Breathability 8 000 g/m2/24h
- Fully-Taped seams
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics
Perfect choice for hunting and fishing
everything fit perfectly






Alaska Extreme Lite 3 Ms Jacket, Brown
The new Alaska Extreme Lite 3 jacket is a light weight and quiet year-round hunting jacket with many technical details. Waterproof and breathable APS 2-layer outer fabric and soft mesh lining. The jacket is equipped with water repellent zippers. Special radio pocket with antenna holder. Adjustable hood at front and back.
- Quiet and soft brushed tricot face material
- PFC-free DWR treatment
- Waterproof and breathable APS membrane
- Extra breathable mesh lining
- Water repellent zippers
- Radio pocket with antenna holder
- Hood adjustment at front and back
Technical specs:
- Waterproofing 20 000 mm
- Breathability 20 000 g/m2/24h
- Fully-Taped seams
The model is 182 cm tall and wearing size M
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics






Alaska Extreme Lite 3 Ms Pant, Brown
The new Alaska Extreme Lite 3 pant is a light weight and quiet year-round hunting pant with many technical details. Waterproof and breathable APS 2-layer outer fabric and soft mesh lining. Equipped with durable water repellent zippers. Velcro adjustments on calves and leg opening.
- Quiet and soft brushed tricot face material
- Waterproof and breathable APS membrane
- PFC-free DWR treatment
- Extra breathable mesh lining
- Water repellent zippers
- Adjustable waistband
- Velcro adjustments on calves and leg opening
Technical specs:
- Waterproofing 20 000 mm
- Breathability 20 000 g/m2/24h
- PFC-free DWR treatment
- Fully-Taped seams
The model is 182 cm tall and wearing size M.
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics














Alaska Extreme Lite 3 Ms Pant, Forest Green
The new Alaska Extreme Lite 3 pant is a light weight and quiet year-round hunting pant with many technical details. Waterproof and breathable APS 2-layer outer fabric and soft mesh lining. Equipped with durable water repellent zippers. Velcro adjustments on calves and leg opening.
- Quiet and soft brushed tricot face material
- Waterproof and breathable APS membrane
- PFC-free DWR treatment
- Extra breathable mesh lining
- Water repellent zippers
- Adjustable waistband
- Velcro adjustments on calves and leg opening
Technical specs:
- Waterproofing 20 000 mm
- Breathability 20 000 g/m2/24h
- PFC-free DWR treatment
- Fully-Taped seams
The model is 182 cm tall and wearing size M.
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics










Alaska Extreme Lite 3 Ms Jacket, Forest Green
The new Alaska Extreme Lite 3 jacket is a light weight and quiet year-round hunting jacket with many technical details. Waterproof and breathable APS 2-layer outer fabric and soft mesh lining. The jacket is equipped with water repellent zippers. Special radio pocket with antenna holder. Adjustable hood at front and back.
- Quiet and soft brushed tricot face material
- PFC-free DWR treatment
- Waterproof and breathable APS membrane
- Extra breathable mesh lining
- Water repellent zippers
- Radio pocket with antenna holder
- Hood adjustment at front and back
Technical specs:
- Waterproofing 20 000 mm
- Breathability 20 000 g/m2/24h
- Fully-Taped seams
The model is 182 cm tall and wearing size M
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics

Alaska Extreme Lite 3 Ms Pant, BlindTech Invisible
The new Alaska Extreme Lite 3 pant is a light weight and quiet year-round hunting pant with many technical details. Waterproof and breathable APS 2-layer outer fabric and soft mesh lining. Equipped with durable water repellent zippers. Velcro adjustments on calves and leg opening.
- Quiet and soft brushed tricot face material
- Waterproof and breathable APS membrane
- PFC-free DWR treatment
- Extra breathable mesh lining
- Water repellent zippers
- Adjustable waistband
- Velcro adjustments on calves and leg opening
Technical specs:
- Waterproofing 20 000 mm
- Breathability 20 000 g/m2/24h
- PFC-free DWR treatment
- Fully-Taped seams
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics












Alaska Extreme Lite 3 Ms Jacket, Blaze 3D
The new Alaska Extreme Lite 3 jacket is a light weight and quiet year-round hunting jacket with many technical details. Waterproof and breathable APS 2-layer outer fabric and soft mesh lining. The jacket is equipped with water repellent zippers. Special radio pocket with antenna holder. Adjustable hood at front and back.
- Quiet and soft brushed tricot face material
- PFC-free DWR treatment
- Waterproof and breathable APS membrane
- Extra breathable mesh lining
- Water repellent zippers
- Radio pocket with antenna holder
- Hood adjustment at front and back
Technical specs:
- Waterproofing 20 000 mm
- Breathability 20 000 g/m2/24h
- Fully-Taped seams
The model is 182 cm tall and wearing size M
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics














Alaska Extreme Lite 3 Ms Bundle Package, Forest Green
Alaska Extreme Lite 3 Ms Bundle Package, Forest Green includes:
- Alaska Extreme Lite 3 Ms Jacket, Forest Green, 1pc
- Alaska Extreme Lite 3 Ms Pant, Forest Green, 1pc
- Alaska Hunter Cap, Moss Brown, 1pc
- Alaska CoolDry Bandana, Moss Brown, 1pc
- Alaska Hunter Suspenders, Black, 1pc
Choose your size for jacket and pant above and other products will be automatically added for your order without an additional cost.
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics
















Alaska Extreme Lite 3 Ms Jacket + Pant, Forest Green
The updated Extreme Lite 3 hunting jacket and pant with APS membrane provides an excellent fit, light weight and water-resistance.
- Silent and light weight, for all kind of hunting activities
- Completely water-resistant (APS membrane + taped seams)
- Color options: Forest Green, Brown, BlindTech Invisible and Blaze 3D
Jacket:
- Radiopockets with antenna loops
- 2 chest pockets and 2 hand pockets with water-repellent zippers
- Adjustable hood and hem
- Light mesh lining
- 2 pockets inside the jacket
Pants:
- 2 open hand pockets
- 2 bellow pockets with water-repellent zippers
- Adjustable leg opening with velcro closing
- Adjustable waist with beltloops
- Light mesh lining
Technical specs:
- Waterproofing 20 000 mm
- Breathability 20 000 g/m2/24h
- Fully-Taped seams
The model is 182 cm tall and wearing size M.
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics










Alaska Extreme Lite III Ms Pant, Blaze 3D (Rain-Stop)
The updated Alaska Extreme Lite III pant is a light weight and quiet year-round hunting pant with many technical details. Waterproof and breathable Rain-Stop 2-layer outer fabric and soft mesh lining. Extra durable YKK water repellent zippers. Velcro adjustments on calves and leg opening.
- Quiet and soft brushed tricot face material
- Waterproof and breathable Rain-Stop membrane
- Extra breathable mesh lining
- YKK water repellent zippers
- Adjustable waistband
- Velcro adjustments on calves and leg opening
Technical specs:
- Waterproofing 10 000 mm
- Breathability 8 000 g/m2/24h
- Fully-Taped seams
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics

Alaska Extreme Lite Jr Jacket + Pant, Forest Green
Extreme Lite 3 hunting jacket and pants with APS membrane provides an excellent fit, light weight and water-resistance.
- Silent and light weight, for all kind of hunting activities
- Completely water-resistant (APS membrane + taped seams)
Jacket:
- Radiopockets with antenna loops
- 2 chest pockets and 2 hand pockets with water-repellent zippers
- Adjustable hood and hem
- Light mesh lining
- 2 pockets inside the jacket
Pants:
- 2 open hand pockets
- 2 bellow pockets with water-repellent zippers
- Adjustable leg opening with velcro closing
- Adjustable waist with beltloops
- Light mesh lining
Technical specs:
Waterproofing 20 000 mm Breathability 20 000 g/m2/24h Fully-Taped seams
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics












Alaska Extreme Lite 3 Ms Pant, BlindMax HD
The new Alaska Extreme Lite 3 pant is a light weight and quiet year-round hunting pant with many technical details. Waterproof and breathable APS 2-layer outer fabric and soft mesh lining. Equipped with durable water repellent zippers. Velcro adjustments on calves and leg opening.
- Quiet and soft brushed tricot face material
- Waterproof and breathable APS membrane
- PFC-free DWR treatment
- Extra breathable mesh lining
- Water repellent zippers
- Adjustable waistband
- Velcro adjustments on calves and leg opening
Technical specs:
- Waterproofing 20 000 mm
- Breathability 20 000 g/m2/24h
- PFC-free DWR treatment
- Fully-Taped seams
The model is 182 cm tall and wearing size M.
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics
















Alaska Extreme Lite 3 Ms Jacket + Pant, Brown
The updated Extreme Lite 3 hunting jacket and pant with APS membrane provides an excellent fit, light weight and water-resistance.
- Silent and light weight, for all kind of hunting activities
- Completely water-resistant (APS membrane + taped seams)
- Color options: Forest Green, Brown, BlindTech Invisible and Blaze 3D
Jacket:
- Radiopockets with antenna loops
- 2 chest pockets and 2 hand pockets with water-repellent zippers
- Adjustable hood and hem
- Light mesh lining
- 2 pockets inside the jacket
Pants:
- 2 open hand pockets
- 2 bellow pockets with water-repellent zippers
- Adjustable leg opening with velcro closing
- Adjustable waist with beltloops
- Light mesh lining
Technical specs:
- Waterproofing 20 000 mm
- Breathability 20 000 g/m2/24h
- Fully-Taped seams
The model is 182 cm tall and wearing size M
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics

Alaska Extreme Lite 3 Ms Jacket + Pant, BlindTech Invisible
The updated Extreme Lite 3 hunting jacket and pant with APS membrane provides an excellent fit, light weight and water-resistance.
- Silent and light weight, for all kind of hunting activities
- Completely water-resistant (APS membrane + taped seams)
- Color options: Forest Green, Brown, BlindTech Invisible and Blaze 3D
Jacket:
- Radiopockets with antenna loops
- 2 chest pockets and 2 hand pockets with water-repellent zippers
- Adjustable hood and hem
- Light mesh lining
- 2 pockets inside the jacket
Pants:
- 2 open hand pockets
- 2 bellow pockets with water-repellent zippers
- Adjustable leg opening with velcro closing
- Adjustable waist with beltloops
- Light mesh lining
Technical specs:
- Waterproofing 20 000 mm
- Breathability 20 000 g/m2/24h
- Fully-Taped seams
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics

