29 products














Alaska Seward Ms Padded Jacket, Black
Alaska Seward jacket is a warm padded jacket for outdoor. The jacket is equipped with breathable and waterproof APS membrane. Fabric is treated with PFC-free DWR treatment for better breathability and water repellency.
- Quiet and soft poly face fabric
- Extra waterproof and waterproof APS membrane
- SuperLoft padding
- Hood adjustment at front and back
- Articulated arms
- Neck warmer at inside of hood at collar
- 2 way center front zipper opening with waterproof zipper
- 2 big zippered hand pockets with water-repellent zippers
- Hanger loop at neck
- Velcro adjustment at sleeve cuffs
- Adjustment at hem
Technical specs:
- Waterproofing 20 000 mm
- Breathability 20 000 g/m2/24h
- PFC-free DWR treatment
- Fully-Taped seams
The model is 182 cm tall and wearing size M
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics






Alaska Seward Ms Padded Pant, Black
Alaska Seward padded pant is equipped with waterproof and breathable APS membrane. In addition, the outer fabric is treated with PFC-free DWR to keep fabric dry. The pants comes with adjustable waist and can be used together with a belt or suspenders. All pockets are protected with water repellent zippers.
- Quiet and durable fabric
- Waterproof and breathable APS membrane
- Extra breathable mesh lining
- Water repellent zippers
- Adjustable waistband
- Velcro adjustments on calves and leg opening
Technical specs:
- Waterproofing 20 000 mm
- Breathability 20 000 g/m2/24h
- PFC-free DWR treatment
- Fully-Taped seams
The model is 182 cm tall and wearing size M
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics
The fashion is great and practical, is comfortable and so one. But for me it was a problem to understand the size - number's! Best regards Andreas from Germany

Alaska Tundra Ms Jacket + Pant, Moss Brown
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics




Alaska Heat System Ms Vest + Powerbank 10000mAh
BUNDLE INCLUDES HEATED VEST AND 10000MAH POWERBANK!
The Alaska Power Heating vest is equipped with integrated heating panels that are powered by a power bank. Three different settings for temperature adjustment. Mesh pocket for power bank.
- Compatible with power bank with USB input (power bank not included)
- 3 different temperature settings: 38, 45 and 55 °C
- Ultra thin and flexible carbon fiber heating elements
- 2 heating elements on chest, 1 on back
- Vest material: softshell
- 2 hand pockets with zippers
User manual:
- The heating vest requires 5V powerbank as a power source with a 2.1A USB output
- Connect the powerbank to the vest with USB-cable that can be found from vest's hand pocket
- Press and hold the chest button for 2 seconds to power up the vest (light will turn red)
- Quickly press the chest button to change temperature setting and the color will change
- Press and hold the chest button for 2 seconds to switch off the heating vest
Temperature settings:
- Low - blue (38°C), avereage operating time with 10 000mAh powerbank is 13h
- Medium - white (45°C), average operating time with 10 000mAh powerbank is 8h
- High - red (55°C), average operating time with 10 000mAh powerbank is 4h
Operating times are average and depend on quality of the powerbank used with the vest. Air temperature also affects on the operating time.
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics




Alaska Heat System Socks
INCLUDES BATTERIES AND CHARGING CABLE!
Never feel cold again with Alaska heated socks. Long and warm socks are equipped with heating elements. Each sock has pocket for the batteries that are included in the package. Sizes: 36-38, 39-41, 42-44, 45-47.
- Power supply: 3000 mAh 5 V Powerbank. (Lithium Polymer)
- Power: Input 5 V/1 A (max) / Output 5 W (max)
- Capacity: 3000 mAh / 11.1 Wh
HOW TO USE
- Fully charge the batteries, then insert them into the battery pockets and connect them
- To switch on the heating function, press and hold the ON/OFF switch for 3-5 seconds until it lights up red
You can choose between 3 heating levels: * Switch lights up red = highest heating level * Press the switch once, it now lights up white/orange = medium level * Press the switch once, it now lights up blue = lowest heating level * Press the switch for 3-5 seconds and the heating function turns off; the glow goes out.
- Allow the product to cool before putting it away
If the product is not going to be used for a long period of time, it is recom- mended to remove the batteries. Separate socks and store them separately. If the socks do not heat up, check that the batteries are correctly connected and charged are.
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics




Alaska Merino Beanie, Moss Brown
A warm merino wool beanie for hunting and outdoor.
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics














Alaska Tundra Ms Jacket, Moss Brown
The Alaska Tundra jacket is waterproof hunting jacket with warm SuperLoft -padding. Long shape provides extra comfortability. Equipped with chest pockets with waterproof zippers and 2 big hand pockets. Adjustable hood and sleeve cuffs.
- Quiet and soft brushed tricot face material
- Waterproof and breathable APS membrane
- PFC-free DWR treatment
- SuperLoft padding
- Ventilation zippers on the side
- Water repellent zippers
- Hood adjustment at front and back
- 2 chest pockets
- 2 hand pocket
Technical specs:
- Waterproofing 20 000 mm
- Breathability 20 000 g/m2/24h
- Fully-Taped seams
The model is 182 cm tall and wearing size M
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics












Alaska Tundra Ms Pant, Moss Brown
The Alaska Tundra pant is waterproof hunting pant with warm SuperLoft -padding. High-rising back and bibs provide extra comfortability. 4 pockets with water repellent zippers. Adjustable waistband and leg opening.
- Quiet and soft brushed tricot face material
- Waterproof and breathable APS membrane
- PFC-free DWR treatment
- SuperLoft padding
- Water repellent zippers
- Hood adjustment at front and back
- 4 pockets with zipper
Technical specs:
- Waterproofing 20 000 mm
- Breathability 20 000 g/m2/24h
- Fully-Taped seams
The model is 182 cm tall and wearing size M.
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics




Alaska Merino Beanie, Black
A warm everyday merino wool beanie for hunting and outdoor.
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics








Alaska Seward Ms Padded Jacket, Dark Blue
Alaska Seward jacket is a warm padded jacket for outdoor. The jacket is equipped with breathable and waterproof APS membrane. Fabric is treated with PFC-free DWR treatment for better breathability and water repellency.
- Quiet and soft poly face fabric
- Extra waterproof and waterproof APS membrane
- SuperLoft padding
- Hood adjustment at front and back
- Articulated arms
- Neck warmer at inside of hood at collar
- 2 way center front zipper opening with waterproof zipper
- 2 big zippered hand pockets with water-repellent zippers
- Hanger loop at neck
- Velcro adjustment at sleeve cuffs
- Adjustment at hem
Technical specs:
- Waterproofing 20 000 mm
- Breathability 20 000 g/m2/24h
- PFC-free DWR treatment
- Fully-Taped seams
The model is 182 cm tall and wearing size M
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics












Alaska Tundra Ms Reversible Padded Vest, Blaze 3D
A warm reversible vest for hunting where one side is Blaze 3D camo and the other BlindMax HD camo. The vest is equipped with warm hand pockets and chest pocket/radio pocket.
- Reversible vest that has orange safety camo on one side and normal camo on the other
- Zippered chest pocket and velcro pocket for radio
- Vest is padded with SuperLoft -fiberfill that makes vest extremely warm
The model is 182 cm tall and wearing size M
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics
So I am 180cm high and 115kg and the 2xl fits me well. I bought this vest as a mid layer to wear as I walk to my hunting blind and once I get to where I am hunting I will put my Tundra jacket and I find myself very warm. So far I haven't found any faults and everything seem very good quality like all my other Alaskan products. Keep up the good work
















Alaska Tundra Ms Jacket, Blaze 3D
The Alaska Tundra jacket is waterproof hunting jacket with warm SuperLoft -padding. Long shape provides extra comfortability. Equipped with chest pockets with waterproof zippers and 2 big hand pockets. Adjustable hood and sleeve cuffs.
- Quiet and soft brushed tricot face material
- Waterproof and breathable APS membrane
- PFC-free DWR treatment
- SuperLoft padding
- Ventilation zippers on the side
- Water repellent zippers
- Hood adjustment at front and back
- 2 chest pockets
- 2 hand pocket
Technical specs:
- Waterproofing 20 000 mm
- Breathability 20 000 g/m2/24h
- Fully-Taped seams
The model is 182 cm tall and wearing size M
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics
I am 180cm and 115kg, I went with a 3xl because of the layers of insulation, I also like a larger jacket for mobility and this jacket fits me well. Recently sat out in the snow -5° c outside with a good wind for along hunt and was very comfortable. I stayed dry and warm.
2xl would have fit me as well, it was just my preference to go 3xl
I am 180cm high and 115kg and I bought this jacket in 3xl because I like to have room to move as well as add layers without the worry of the jacket being to tight. The arm leg was perfect for me and during -3 degrees and 5 hours of hunting I was surprised how comfortable I was. Combine the Tundra vest and Jacket together along with a good base and mid layer you will stay warm. Keep up the good work
I am 180cm and 113kg, the 3xl for me was a great fit but I like my hunting jackets a little on the bigger side. The jacket seems I top quality but it is not cold enough to wear just yet but I really enjoy Alaska clothing and cannot wait to see how it performs.
Good afternoon. Haven't used it yet, it's not that cold. However, I am sure that the quality is ok because I use several of your products.






Alaska Heat System Muff
Never feel cold again with Alaska heated muff. Muff can be used like belt bag and it has fleece lining for heating up the hands. Heating function uses external powerbank that can be stored in the muff zippered front pocket. Adjustable size.
- Power supply: 5 V/2 A Powerbank (not included)
- Heating temperature: Max. 45°C
- Operating time: Up to 3-7 hours (depending on powerbank that is used)
HOW TO USE
- Fully charge your powerbank, then insert it into the muff’s pocket and connect to the USB cable.
- To switch on the heating function, press and hold the ON/OFF switch for 3-5 seconds until it lights up red.
You can choose between 3 heating levels: * Switch lights up red = highest heating level * Press the switch once, it now lights up white/orange = medium level * Press the switch once, it now lights up blue = lowest level * Press the switch for 3-5 seconds and the heating function turns off; the glow goes out.
- Allow the product to cool before putting it away. If the muff does not heat up, check that the powerbank is correctly connected and charged.
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics












Alaska Tundra Ms Jacket + Pant, Blaze 3D
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics








Alaska Ms Down Jacket, Moss Brown
Alaska Down jacket is perfect choice to be used as insulation with shell jacket in hunting but it also works well for off-hunt activities as an outer layer. Packable jacket uses high-quality fabrics and 90/10 down insulation. The jacket comes with durable PFC-free nylon fabric.
- Durable nylon outer fabric
- Special Alaska Down quilting
- PFC-free DWR treatment
- 90/10 down
- Chinguard
- Roomy hand pockets
- Fixed, adjustable hood
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics












Alaska Superior Merino Ms Base Layer Set
Alaska Superior Merino Baselayer is designed for an active person who wants to stay warm even in the coldest weather. Merino wool is comfortable and warm against the skin. It’s not itchy such as normal wool materials. Merino wool provides a natural UV protection and has antibacterial features. The material is highly breathable and keeps you warm even when it’s damp.
Alaska Superior Merino fabric is specially designed for outdoor and hunting providing lightness, warmth and durability. This merino fabric is knitted with extra durable Cordura Nylon. Highly stretchable base layer provides comfort and freedom of movement.
- Flatlock seam structure
- Extended back panel
- 170 g/m2 merino fabric
- Merino wool 58%, Cordura Nylon 38%, Lycra 4%
- Mulesing-free merino
- Crewneck on top
- Bottom with elastic band
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics

Alaska Seward Ws Padded Pant, Black
Alaska Seward padded pant is equipped with waterproof and breathable APS membrane. In addition, the outer fabric is treated with PFC-free DWR to keep fabric dry. The pants comes with adjustable waist and can be used together with a belt or suspenders. All pockets are protected with water repellent zippers.
- Quiet and durable fabric
- Waterproof and breathable APS membrane
- Extra breathable mesh lining
- Water repellent zippers
- Adjustable waistband
- Velcro adjustments on calves and leg opening
Technical specs:
- Waterproofing 20 000 mm
- Breathability 20 000 g/m2/24h
- PFC-free DWR treatment
- Fully-Taped seams
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics
















Alaska Tundra Ms Jacket, BlindTech Snow
The Alaska Tundra jacket is waterproof hunting jacket with warm SuperLoft -padding. Long shape provides extra comfortability. Equipped with chest pockets with waterproof zippers and 2 big hand pockets. Adjustable hood and sleeve cuffs.
- Quiet and soft brushed tricot face material
- Waterproof and breathable APS membrane
- PFC-free DWR treatment
- SuperLoft padding
- Ventilation zippers on the side
- Water repellent zippers
- Hood adjustment at front and back
- 2 chest pockets
- 2 hand pocket
Technical specs:
- Waterproofing 20 000 mm
- Breathability 20 000 g/m2/24h
- Fully-Taped seams
The model is 182 cm tall and wearing size M
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics












Alaska Superior Merino Ws Base Layer Set
Alaska Superior Merino Baselayer is designed for an active person who wants to stay warm even in the coldest weather. Merino wool is comfortable and warm against the skin. It’s not itchy such as normal wool materials. Merino wool provides a natural UV protection and has antibacterial features. The material is highly breathable and keeps you warm even when it’s damp.
Alaska Superior Merino fabric is specially designed for outdoor and hunting providing lightness, warmth and durability. This merino fabric is knitted with extra durable Cordura Nylon. Highly stretchable base layer provides comfort and freedom of movement.
- Flatlock seam structure
- Extended back panel
- 170 g/m2 merino fabric
- Merino wool 58%, Cordura Nylon 38%, Lycra 4%
- Mulesing-free merino
- Crewneck on top
- Bottom with elastic band
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics


















Alaska Heat System Ms Vest
The Alaska Power Heating vest is equipped with integrated heating panels that are powered by a power bank. Three different settings for temperature adjustment. Mesh pocket for power bank.
- Compatible with power bank with USB input (power bank not included)
- 3 different temperature settings: 38, 45 and 55 °C
- Ultra thin and flexible carbon fiber heating elements
- 2 heating elements on chest, 1 on back
- Vest material: softshell
- 2 hand pockets with zippers
User manual:
- The heating vest requires 5V powerbank as a power source with a 2.1A USB output
- Connect the powerbank to the vest with USB-cable that can be found from vest's hand pocket
- Press and hold the chest button for 2 seconds to power up the vest (light will turn red)
- Quickly press the chest button to change temperature setting and the color will change
- Press and hold the chest button for 2 seconds to switch off the heating vest
Temperature settings:
- Low - blue (38°C), avereage operating time with 10 000mAh powerbank is 13h
- Medium - white (45°C), average operating time with 10 000mAh powerbank is 8h
- High - red (55°C), average operating time with 10 000mAh powerbank is 4h
Operating times are average and depend on quality of the powerbank used with the vest. Air temperature also affects on the operating time.
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics






Alaska Heat System Gloves
INCLUDES BATTERIES AND CHARGING CABLE!
Never feel cold again with Alaska heated gloves. High quality padded gloves are equipped with heating elements. Each glove has pocket for the batteries that are included in the package. Sizes: S-XL.
- Power supply: 2 x 5 V Lithium Polymer Batteries
- Capacity: 3000 mAh
- Heating temperature: Max. 45°C
- Operating time: Up to 2,5-5 hours
HOW TO USE
- Fully charge the batteries, then insert them into the glove pockets and connect them
- To switch on the heating function, press and hold the ON/OFF switch (c) for 3-5 seconds until it lights up red.
You can choose between 3 heating levels: * Switch lights up red = highest heating level * Press the switch once, it now lights up white/orange = medium level * Press the switch once, it now lights up blue = lowest level * Press the switch for 3-5 seconds and the heating function turns off; the glow goes out.
- Allow the product to cool before putting it away.
If the product is not going to be used for a long period of time, it is recommended to separate the batteries from the gloves and store them separately. If the gloves do not heat up, check that the batteries are correctly connected and charged.
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics














Alaska Tundra Ms Pant, BlindTech Snow
The Alaska Tundra pant is waterproof hunting pant with warm SuperLoft -padding. High-rising back and bibs provide extra comfortability. 4 pockets with water repellent zippers. Adjustable waistband and leg opening.
- Quiet and soft brushed tricot face material
- Waterproof and breathable APS membrane
- PFC-free DWR treatment
- SuperLoft padding
- Water repellent zippers
- Hood adjustment at front and back
- 4 pockets with zipper
Technical specs:
- Waterproofing 20 000 mm
- Breathability 20 000 g/m2/24h
- Fully-Taped seams
The model is 182 cm tall and wearing size M.
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics

Alaska Seward Ms Bundle Package, Black
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics




» Alaska Merino Beanie, Moss Brown (100% off)
This product is used for the app Free Gifts BOGO buy x get y to work.
Please do not delete it while the offers are still running!
If you need assistance, please contact us via Livechat in-app or email us at:
support@secomapp.com
.
- Delivery time: 3-7 business days
- Shipping cost: 7,90€
- (Austria, Belgium, Bulgaria, Czech, Denmark, Germany, Hungary, Luxembourg, Netherlands, Poland, Portugal, Slovakia, Slovenia, Sweden, Croatia)
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
- (France, Italy, Spain)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
- (Estonia, Latvia, Lithuania)
- Delivery time: 1-3 business days
- Delivery cost: 5,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics