9 products




Burrel Magnetic Gun Mount
The magnetic Burrel Gun Mount is the quickest way to attach a flash light to a gun barrel. This mount fits on all 1" diameter flash lights. Height of the mount is 20mm. Strong magnet will keep the mount stable during shooting.
- Magnetic gun mount for a flash light
- Quick to attach and remove from a barrel
- Strong magnets
- Fits on all 1" body flash lights
- Height: 20mm
Bulgaria, Croatia, France, Hungary, Italy, Luxembourg, Norway, Slovakia, Slovenia, Portugal and Spain
- Delivery time: 3-7 business days
- Shipping cost: 12,90€
Austria, Belgium, Czhechia, Denmark, Germany, Netherlands, Poland and Sweden
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
Finland, Estonia Latvia, Lithuania
- Delivery time: 1-3 business days
- Delivery cost: 7,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics




Burrel Hunting Light Set Standard (Green)
Ready-to-use hunting light kit that includes everything necessary! Burrel Standard flash light uses Cree XP-E LED which is perfect for hunters. Green light can be used together with night vision devices. Dimensions: 44 x 153 mm.
Package includes:
- Gun mount
- Lanyard
- Remote switch
- 2pcs batteries
- Charger
Bulgaria, Croatia, France, Hungary, Italy, Luxembourg, Norway, Slovakia, Slovenia, Portugal and Spain
- Delivery time: 3-7 business days
- Shipping cost: 12,90€
Austria, Belgium, Czhechia, Denmark, Germany, Netherlands, Poland and Sweden
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
Finland, Estonia Latvia, Lithuania
- Delivery time: 1-3 business days
- Delivery cost: 7,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics






Burrel HL Hunter -rechargeable headlamp, 1000lm
Powerful headlamp for hunting with 1000lm light output. In addition to the usual white light, the headlamp has green and UV light modes. The headlamp can be charged via the USB-C connector with fast charging, and an adapter for 3xAAA batteries is also included.
- Light output 1000lm
- CREE L2 LED
- In addition, UV light for tracking blood traces
- In addition, a green light
- 21700 4400mAh power battery
- USB-C fast charging
- Adapter for 3xAAA batteries
- Compact body made of aircraft aluminum
Contents of the package:
- Burrel HL Hunter headlamp
- Headband
- 21700 4400mAh battery
- USB-C charging cable
- Adapter for 3xAAA batteries
Bulgaria, Croatia, France, Hungary, Italy, Luxembourg, Norway, Slovakia, Slovenia, Portugal and Spain
- Delivery time: 3-7 business days
- Shipping cost: 12,90€
Austria, Belgium, Czhechia, Denmark, Germany, Netherlands, Poland and Sweden
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
Finland, Estonia Latvia, Lithuania
- Delivery time: 1-3 business days
- Delivery cost: 7,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics




Burrel MTB-10 -rechargeable bike light set, 1100lm
Burrel bike LED light set includes 1100lm front light and red rear light with brackets. Both lamps are rechargeable including the batteries. The package includes a USB charging cable.
Bulgaria, Croatia, France, Hungary, Italy, Luxembourg, Norway, Slovakia, Slovenia, Portugal and Spain
- Delivery time: 3-7 business days
- Shipping cost: 12,90€
Austria, Belgium, Czhechia, Denmark, Germany, Netherlands, Poland and Sweden
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
Finland, Estonia Latvia, Lithuania
- Delivery time: 1-3 business days
- Delivery cost: 7,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics






Burrel FL10 -rechargeable flashlight, 1000lm
The Burrel FL10 is a powerful tactical flashlight with a magnetic charger! The lamp is made of durable aircraft aluminum and is classified as waterproof according to the IP67 standard. The lamp has 5 different light modes and a range of up to 300m. In addition to the lamp, the package includes an 18650 battery and a charging cable with a magnetic connector.
5 different light modes:
- Turbo: 1000lm (1h 50min)
- High: 400lm (2h 50min)
- Medium: 120lm (9h)
- Low: 20lm (60h)
- Strobe
Technical information:
- Beam angle: 6°
- Luminous intensity: 20,000cd
- Beam distance: 300m
- Waterproof: IP67
- Length: 133mm
- Body diameter: 26.2mm
- Weight: 76g
Bulgaria, Croatia, France, Hungary, Italy, Luxembourg, Norway, Slovakia, Slovenia, Portugal and Spain
- Delivery time: 3-7 business days
- Shipping cost: 12,90€
Austria, Belgium, Czhechia, Denmark, Germany, Netherlands, Poland and Sweden
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
Finland, Estonia Latvia, Lithuania
- Delivery time: 1-3 business days
- Delivery cost: 7,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics
Burrel HL Hunter -rechargeable headlamp, 1000lm
Powerful headlamp for hunting with 1000lm light output. In addition to the usual white light, the headlamp has green and UV light modes. The headlamp can be charged via the USB-C connector with fast charging, and an adapter for 3xAAA batteries is also included.
- Light output 1000lm
- CREE L2 LED
- In addition, UV light for tracking blood traces
- In addition, a green light
- 21700 4400mAh power battery
- USB-C fast charging
- Adapter for 3xAAA batteries
- Compact body made of aircraft aluminum
Contents of the package:
- Burrel HL Hunter headlamp
- Headband
- 21700 4400mAh battery
- USB-C charging cable
- Adapter for 3xAAA batteries
Bulgaria, Croatia, France, Hungary, Italy, Luxembourg, Norway, Slovakia, Slovenia, Portugal and Spain
- Delivery time: 3-7 business days
- Shipping cost: 12,90€
Austria, Belgium, Czhechia, Denmark, Germany, Netherlands, Poland and Sweden
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
Finland, Estonia Latvia, Lithuania
- Delivery time: 1-3 business days
- Delivery cost: 7,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics




Burrel Camp Torch
The Burrel camping torch is a compact light that can easily be taken with you on all trips! The lamp offers a light output of up to 800lm and a zoomable light beam. This multi-purpose lamp can be used as a torch or a travel lantern. The base is equipped with a magnet, which makes it easier to attach the lamp to metal surfaces. In addition, there is a hanging loop at the top of the lamp. Either 3xAAA batteries or 1x18650 battery can be used as a power source.
- Light output: 800lm
- Zoomable beam
- The base is equipped with a magnet
- Hanging loop at the top
- 3xAAA batteries or 1x18650 battery
- Durable aluminum frame
Bulgaria, Croatia, France, Hungary, Italy, Luxembourg, Norway, Slovakia, Slovenia, Portugal and Spain
- Delivery time: 3-7 business days
- Shipping cost: 12,90€
Austria, Belgium, Czhechia, Denmark, Germany, Netherlands, Poland and Sweden
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
Finland, Estonia Latvia, Lithuania
- Delivery time: 1-3 business days
- Delivery cost: 7,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics




Burrel DSGR Laser Designator Set
- Laser designator with an adjustable green laser beam
- Maximum distance even 1.5 kilometres
- Can be used as a flash light (wide beam) or laser designator (narrow beam)
- Can be mounted on rifle scopes with 1" or 30mm body or on Picatinny/Weaver
- Certified in EU, Class 3R Laser
- Power: CR123A battery (not included)
Burrel DSGR laser designator is a powerful and tactical laser light with adjustable green laser beam. When the beam is set to narrow, maximum distance is even 1.5 kilometres.
Package includes:
- Burrel DSGR laser light
- Adjustable mount
- Adapters
- Remote switch
Bulgaria, Croatia, France, Hungary, Italy, Luxembourg, Norway, Slovakia, Slovenia, Portugal and Spain
- Delivery time: 3-7 business days
- Shipping cost: 12,90€
Austria, Belgium, Czhechia, Denmark, Germany, Netherlands, Poland and Sweden
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
Finland, Estonia Latvia, Lithuania
- Delivery time: 1-3 business days
- Delivery cost: 7,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics




Burrel Hunting Light Set Mini (Green)
Ready-to-use hunting light kit that includes everything necessary! Burrel Mini flash light uses Cree XP-E LED which is perfect for hunters. Green light can be used together with night vision devices. Dimensions: 40 x 127 mm.
Package includes:
- Gun mount
- Lanyard
- Remote switch
- 2pcs batteries
- Charger
Bulgaria, Croatia, France, Hungary, Italy, Luxembourg, Norway, Slovakia, Slovenia, Portugal and Spain
- Delivery time: 3-7 business days
- Shipping cost: 12,90€
Austria, Belgium, Czhechia, Denmark, Germany, Netherlands, Poland and Sweden
- Delivery time: 3-7 business days
- Shipping cost: 9,90€
Finland, Estonia Latvia, Lithuania
- Delivery time: 1-3 business days
- Delivery cost: 7,90€
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics