Alaska Heat System Gloves
INCLUDES BATTERIES AND CHARGING CABLE!
Never feel cold again with Alaska heated gloves. High quality padded gloves are equipped with heating elements. Each glove has pocket for the batteries that are included in the package. Sizes: S-XL.
- Power supply: 2 x 5 V Lithium Polymer Batteries
- Capacity: 3000 mAh
- Heating temperature: Max. 45°C
- Operating time: Up to 2,5-5 hours
HOW TO USE
- Fully charge the batteries, then insert them into the glove pockets and connect them
- To switch on the heating function, press and hold the ON/OFF switch (c) for 3-5 seconds until it lights up red.
You can choose between 3 heating levels: * Switch lights up red = highest heating level * Press the switch once, it now lights up white/orange = medium level * Press the switch once, it now lights up blue = lowest level * Press the switch for 3-5 seconds and the heating function turns off; the glow goes out.
- Allow the product to cool before putting it away.
If the product is not going to be used for a long period of time, it is recommended to separate the batteries from the gloves and store them separately. If the gloves do not heat up, check that the batteries are correctly connected and charged.
Delivery times (business days, from shipping day)
Denmark, Finland, Estonia, Latvia, Lithuania, Sweden
- Estimated delivery time: 1-2 business days
Germany, Poland
- Estimated delivery time: 3 business days
Austria, Belgium, France, Italy, Netherlands
- Estimated delivery time: 4 business days
Rest of European countries
- Estimated delivery time: 4-6 business days
General care instructions for Alaska 1795 clothes:
- Wash the garment only when necessary. Washing too often can cause the garment to wear out. Small dirt stains can be removed by wiping the garment with a damp cloth.
- Close zippers, buttons and Velcro before washing.
- Avoid using fabric softener, especially on membrane clothing.
- Wash new clothes together with clothes of the same color.
- Do not use a tumble dryer unless necessary
Membrane clothing (APS, Rain-Stop)
- Follow the washing instructions on the garment
- Close velcro, zippers and buttons before washing
- Do not use fabric softener
- Avoid spinning to protect the membrane and taping
- Use a drying cabinet for drying if possible, and this way the water-repellent DWR treatment on the surface of the garment is activated after washing
- Keep the garment clean to prevent its membrane from clogging
Baselayers (CoolDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Wash the baselayers inside out to protect the logos
- Dry the product by hanging it on a drying rack
Baselayers (Merino)
- Wool repels dirt much better than synthetic materials, so wool products do not need to be washed often
- You can replace washing with careful ventilation
- When washing, carefully follow the washing instructions on the garment
- Use a wool detergent
- Dry woolen products flat to prevent them from stretching
Midlayers (ThermoDry)
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Close velcro, zippers and buttons before washing
- Wash the midlayers inside out to protect the logos
- Dry the product by hanging it on a drying rack or in a drying cabinet
Accessories
- Follow the washing instructions on the garment
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Dry the product by hanging it on a drying rack
Thermal products
- Remove the batteries from the products
- Follow the washing instructions on the garment carefully
- Do not use fabric softener, as it can weaken the technical properties of the garment
- Do not tumble dry
- Dry on low heat to protect the electronics
Alaska Heat System Gloves